النحاس بالنحاس مختلط

Copper to Copper Brazing Description

Copper and copper welding is very extensive, especially in the welding of various pipe joints. When phosphorus-containing rods are used, copper-to-copper connections do not require flux.

Copper and copper welding generally do not require preheating because of the same thermal conductivity.

Copper to Copper Brazing Product Series

تي شيرت بانت النحاس

تي شيرت بانت النحاس

يعتبر Copper Pant Tee عبارة عن لحام نحاسي ونحاسي نموذجي، والذي يتمتع بميزة طبيعية على اللحام التلقائي لمثل هذه الأنابيب الصغيرة

أنبوب فرعي

أنبوب الفرع

الأنبوب الفرعي هو نوع من الأنابيب النحاسية وأنواع عديدة. سنقوم بتصميم الأدوات المناسبة لجعل آلة اللحام الأوتوماتيكية تعمل بشكل طبيعي.

رئيس موزع النحاس

رئيس موزع النحاس

يتطلب رأس الموزع النحاسي لحام رأس نحاسي وأنبوب نحاسي ، والنحاس هو العملية المفضلة ، ويمكن لآلة اللحام بالنحاس الأوتوماتيكية العثور بسرعة ودقة على موضع الارتباط ، والجودة مستقرة

مشعب النحاس

مشعب النحاس

واجهات متعددة لمشعب النحاس، وأشكال معقدة، هذه ليست مشكلة، لدينا حلول الأدوات المناسبة

مشعب أنابيب النحاس

مشعب أنابيب النحاس

مشعب الأنابيب النحاسية عبارة عن لحام نموذجي من النحاس والنحاس الأصفر ، ويمكن أن تضمن عملية اللحام بالنحاس بالإضافة إلى اللحام المناسب تلفًا طويل المدى لمشعب الأنابيب النحاسية

مشعب عرق النحاس

مشعب عرق النحاس

مشعب العرق النحاسي متعدد الأنابيب ، يمكننا أن نجعل الأنابيب الصغيرة ملحومة بالنحاس بدقة في الموضع الصحيح من خلال الأدوات المقيدة

ميزات آلة اللحام الأوتوماتيكية

  • وقت تغذية قابل للتعديل
  • سخن
  • نظام إطفاء النيتروجين
  • صمام الملف اللولبي الغاز SMC
  • ميتسوبيشي PLC
  • مفاتيح يدوية / شاشة تعمل باللمس
  • محرك متدرج
  • زجاج أمان
  • مفتاح استشعار اومرون
  • شاشة تعمل باللمس ، لوحات تحكم قائمة على القوائم ومتعددة اللغات
آلة لحام أوتوماتيكية

مزايا آلة اللحام الأوتوماتيكية

تحسين الكفأة

يمكن للآلة الأوتوماتيكية بالكامل زيادة الطاقة الإنتاجية بمقدار 10 مرات 20 مرة

حسن الجودة

جودة اللحام بالنحاس الأوتوماتيكي مستقرة ولن تتقلب بسبب عوامل اصطناعية

تكلفة منخفضة

توفر الآلات الأوتوماتيكية بالكامل الوقت وتستخدم المواد بشكل أكثر دقة ، مما يوفر التكاليف.

آلة تسليم المفتاح

نقوم بتحسين خدمة ما بعد البيع ، ولا داعي للقلق ، وخدمات وقت الرفع


جميع إكسسواراتنا هي من موردي العلامات التجارية المشهورة عالميًا ، مثل Mitsubishi Group و Omron وما إلى ذلك.

تتمتع التكنولوجيا الأساسية بحقوق ملكية فكرية مستقلة وهي بحث وتطوير مستقل تمامًا.

نحن لا نصنع سلعًا استهلاكية عادية. يحتاج العملاء إلى استخدامها لمدة 10 أو حتى 30 عامًا بعد الشراء. الجودة والمتانة هي اعتباراتنا الأساسية.

Copper to Copper Brazing Guide

In today’s industry sector,  you will find that copper is the most extensively used metal. Due to the fact that it has superior advantages and qualities over other metals. It has excellent electrical conductivity, strong resistance to corrosion, and is simple to machine. As a result, many businesses are opting to use this type of metal instead.

You can either weld, braze, or solder copper. But what if I tell you that brazing is best accomplished with copper? Here, we’ll talk about why copper brazing is the best method and explain some helpful tips for copper to copper brazing in order for you to avoid creating any faults in future welds.

1.    What is Copper Brazing?

النحاس إلى النحاس مختلط   Figure 1.  Copper Brazing

The process of welding two pieces of metals using intense heat is referred to as Copper Brazing. Most often, you will find this process being used by skilled experts. Copper brazing is often used in various heating, ventilation, air conditioning, electrical, and valve applications.

Copper brazing is an excellent choice for the process of welding joints since it offers the following advantages:

  • They serve as a barrier against flames that may break out close to the joints and cause an increase in temperature.
  • The air conditioning and refrigeration system function better with Copper Brazing.
  • When used in a fuel gas system, Copper brazing act more effectively.
  • While reservoirs and water supply tankers are used to store water, leakage may sometimes occur. However, the copper-brazed joints prevent them from leaking.

2.    Why Is Copper Brazing Used?

النحاس إلى النحاس مختلطFigure 2. Illustration of joining two separate copper pieces.

If you wish to connect two different pieces of copper together to form one larger piece, then Copper Brazing is the right way to do it. You can also connect copper with other base metals such as brass, steel, and aluminum. Typically, copper brazing is used in those circumstances where increased joint strength is required, as well as in systems that run at temperatures of 350 degrees or higher.

3.    How Can You Operate Copper To Copper Machine?


How to operate a Copper to Copper Machine? Although this question may seem easy for several people, there is more than meets the eye. So let’s take a look at this machinery.

The Copper to Copper Machine is fully automated that brazes numerous joints simultaneously. It is able to join different copper fittings in a speedy and secure manner. All of the operations, including placing the pre-assembled pieces into the coil, adding flux, heating the product to brazing temperature, and cooling the product to a safe temperature before it is handed off to an operator, are carried out mechanically by Copper to Copper Machine.

In addition, while the workpiece is being heated, the temperature control system of the Copper to Copper Machine will monitor the workpiece’s temperature and will remove the workpiece from the heating cycle once the temperature reaches the point where it is no longer required.

4.    How To Braze Copper To Copper?

Copper to copper brazing is the most common method for joining two pieces. There are two different ways to braze Copper to Copper:

  • Using filler metal only
  • Using filler metal and flux

However, the process of brazing begins with heating the copper. After that, cover the surface with a layer of constantan, which is a sort of metal that has a high thermal conductivity but a low electrical resistance. Additionally, fusing the two pieces together requires heating them to 250°C.

Moreover, if the thermal conductivity of constantan is insufficient, you can join copper to copper pieces together using a flux-covered brazing rod. For this process you have to carry out the following steps:

  • First, you have to apply flux.
  • Later heat the rod and copper pipe.
  • Lastly, you have to apply solder paste to the rod.

Nonetheless, if you use flux on both parts, the solder will flow more smoothly. As a result of this, the outcome of the copper brazing process will be much improved.

5.    Do You Need To Use Flux When Brazing Copper To Copper?

Flux is a chemical substance that is spread over the surfaces of the joints. It is a critical step in the copper brazing process. However, there are a few exceptions to this rule. You can also connect copper to copper brazing without applying flux when you use phosphorus-containing rods. This is because phosphorus acts as a fluxing agent on copper.

6.    List Some Products That Are Made From Copper To Copper Brazing?

The following is a list of finished items created by the copper to copper brazing:

7.    Which Types Of Flames Are Used In Copper To Copper Brazing?

النحاس إلى النحاس مختلطFigure 3. Different types of flames for Copper to Copper Brazing

There are three types of flames: neutral, carbonized, and oxidizing flame. However, the use of carbonized flame and oxidizing flame is not recommended. This is due to the fact that soot will be produced during the burning process if you use a carbonized flame, which will harm the performance of the Copper brazing.

On the other hand, if you use an oxidizing flame, the oxidation of the base metals will occur more quickly, which will impede the flow of the solder and the wetting process. For this reason, the usage of a neutral flame is strongly recommended rather than any other kind of flame.

8.     Is Copper Brazing The Same As Copper Soldering?

النحاس إلى النحاس مختلطFigure 4. Visual comparison of a brazed joint to a soldered joint

Copper Brazing and Copper Soldering are essentially the same procedure. However, the main distinction between both procedures is the temperature at which they are performed. Copper Brazing is done at temperatures that are higher than 840°F (450°C), while Copper Soldering is done at temperatures that are lower than  840°F (450°C).

9.     What Outcomes You May Anticipate From Using A Copper To Copper Machine?

النحاس إلى النحاس مختلطFigure 5. Brazing copper together with a Copper to Copper Machine

Automated Copper to Copper Machine is capable of producing high-quality, durable components for almost all market sectors. It is well-known for its constant ability to achieve tight tolerances, quick cycle times, and precise outcomes.

However, you can expect this from a Copper To Copper Machine.

  • The brazed connections are reliable and consistent in quality.
  • Enhanced levels of productivity
  • The whole system is fully automated and does not need any intervention from the operator.
  • It allows for the production of copper parts with a high degree of repetition.
  • There is precise timing and flux control with the Copper to Copper Machine.

10.   What Are Some Helpful Techniques To Bear In Mind While Brazing Copper To Copper?

For a successful copper-to-copper braze, here are some helpful tips to bear in mind:

  • The speed at which you carry your flame should remain constant.
  • During the process, if you overheat the parts, the flux becomes full of oxides which will later turn the metal’s color into green or black. If this is the case, a mild acid solution will do the trick in removing the flux.
  • As Copper Brazing relies on capillary action, a dirty surface reduces its effectiveness. So a filler metal won’t connect to a surface with oils, dirt particles, or other residues. Therefore, you should wipe off the surfaces to ensure they are clean and untouched.

أرسل استفسارك الآن